Advertisement
General guidelines for safe operation.
Read all instructions carefully. Failure of the
nature following instructions can cause electric
shock, fire and / or severe injuries. Keep these
instructions in a safe place.
1. Safety in the workplace.
1.1. Keep your workplace clean and well lit.
Disarray and poor lighting may contribute to the
occurrence of an accident.
1.2. Do not operate electrical plane in an
environment with increased risk of an explosion
in the vicinity of flammable liquids, gases or
powders.
1.3. Keep children and bystanders at a safe
distance while working with electrical plane. If
your attention is diverted, you may lose control
over the power plane.
2. Safety when working with electricity.
2.1. Plug electrical plane must be suitable
for contact. In no case is allowed to modify the
structure of the plug. When working with zero
appliances, do not use adapters to plug. Using
original plugs and sockets reduces the risk of
electric shock.
2.2. Avoid touching your body to earthed
bodies, for example pipes, heaters, stoves and
refrigerators. When your body is grounded, risk
of electric shock is greater.
2.3. Protect the power plane from rain and
moisture. Penetration of water in the electric
plane increases the risk of electric shock.
2.4. Do not use a power cord for purposes
for which it is provided, for example, to carry
electrical plane for cable or removing the plug
from the outlet. Protect cords from heat, oil and
contact with sharp edges or moving units of
machines. Damaged or twisted cables increase
the risk of electric shock.
2.5. When working with electrical plane in
the open switch so only in plants equipped
with electric switch Fi (switch safety shut with
Residual protection), and current leakage, in
which trigger must be no more than 30 mA. Use
only extension, suitable for outdoor use. Using
the extension, designed for outdoor use reduces
the risk of electric shock.
2.6. If it is necessary to use the power
plane and in a humid environment, including
the machine only in installations equipped with
electric switch Fi. Use of such a safety switch Fi
currents reduces the risk of electric shock.
3. Safer way of working.
3.1. Be concentrated, watch their actions
carefully and act cautiously and prudently. Do
not use electrical plane when you are tired or
under the influence of drugs, alcohol or narcotic
drugs. An instant distraction when working with
electrical plane may have the effect of extremely
serious injuries.
3.2. Work with protective work clothing and
always with safety glasses. Wearing appropriate
for
their
operations
equipment such as breathing masks, healthy,
tightly closed shoes with a stable grab, safety
goggles, protective helmet and silencers (hearing
protectors), reduces the risk of accident.
3.3. Avoid the danger of incorporating electric
plane inadvertently. Before you turn the plug
into the power supply network, make sure the
trigger switch is in position "off". If, when you
carry the power plane, keep your finger on the
trigger switch, or if you submit a voltage of the
power plane when turned on, there is the risk of
accident.
3.4. Before you turn on the power plane make
sure you have removed it all utilities and keys.
Utilities, forgotten rotating unit can cause injuries.
3.5. Avoid unnatural positions of the body.
Work in a stable position of the body at any time
and keep the balance. So you can control the
electrical plane better and safer, it becomes an
unexpected situation.
3.6. Work with appropriate clothing. Do not
operate with loose clothing or ornaments. Keep
your hair, clothes and gloves at a safe distance
from rotating units of electrical plane. Robes,
attire, long hair can be caught and carried away
by the rotating parts.
3.7. If it is possible to use external aspiration
system, make sure it is switched on and
functioning properly. Use of the aspiration system
reduces the risks due to the discharge dust at
work.
4. Thoroughly respect to the electrical plane.
4.1. Do not overload electrical plane. Use the
power plane only in accordance with its purpose.
You will operate better and safer when using the
appropriate power plane in the specified by the
manufacturer a range of loading.
4.2. Do not use the planer, whose starting
switch is damaged.
Plane, which can not be excluded and included
as intended by the manufacturer, is dangerous
and must be repaired.
4.3. Before you modify the settings of the
power plane, to replace blades and attachment,
and when a long time not using it, unplug the
plug from the supply network. This measure
eliminates the danger of triggering electrical
plane inadvertently.
9
personal
protective
Advertisement
