Advertisement
Lubricating
Loosen the grease cap with a spanner, remove it and fill the grease into the opening.
Commissioning
Before starting this device for the very first time, press the primer a few times in order to sup-
ply its system with fuel (see figure 4).
Hold the hand grip with one hand and quickly pull the recoil start with the other until its cable
reaches a length of about 50 cm. Do not let the recoil start rebound freely and instead guide it
back in order to protect the starter.
Open the ventilation once the motor has been started.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62296
Page 7
03
2021-1
Advertisement
