Stack Configuration; Port Status - Cisco Linksys SGE2010P Admin Manual

Stack Configuration

You can use the Stack Configuration screen to specify the Stack ID for the Ethernet switch. By
default, ID numbers are automatically assigned to each device.
To open this screen:
1. From the Switch Main Menu, select 1. System Configuration.
2. From the System Configuration Menu, select 11. Stack Configuration.

Port Status

The Port Status menu provides access to screens where you can view the port status and the
PoE status for each port on the switch.
1. Port Status (see page 45)
2. PoE Status (see page 45)
0.Back (Select to return to the previous screen.)
To open this screen:
From the Switch Main Menu, press 2. Port Status.
SGE2010/SGE2010P Administration Guide
Using the Console
Port Status
44