Baxi SH 7 COMPACT Installation And Service Manual page 36

9 Commissioning
Fig.41 Time
Fig.42 Date
Fig.43 Selection: System or diagram
Fig.44 Finalising settings in the
commissioning menu
Sistema Esquema
Guardar? Si
36 Solar hydraulic unit
Guardar? Si
BA-0000081-01
Time
Set the clock. Set the hours first, then the minutes.
Date
Adjust today's date. Set today's date by setting the year first, then the
month and the day.
Selection: System or diagram
Select to configure the controller with a system.
Select solar system 1. This solar system has the following configuration of
sensors and relays:
Tab.17 Sensors and relays in solar system 1
Sensors
Collector 1 S1
Lower accumulator S2
Finalising settings in the commissioning menu
After selecting the system or entering the diagram number, a security
request is displayed. If the request is confirmed, the settings will be saved.
To confirm the security request, press the right-hand button.
To return to the commissioning menu, press the left-hand button. After
confirming the safety request, the solar control is ready to use and should
make optimal use of the system using the factory settings.
Importante
All the settings made during commissioning can be changed later
if necessary, via the corresponding parameter. Additional
functions and options can also be enabled and adjusted.
Solar pump R1; PWMA
- -
7729335 - 04 - 12052021