Baxi SH 7 COMPACT Installation And Service Manual page 34

9 Commissioning
9.4 Commissioning procedure for SH7 Compact Top
Fig.35 Language
34 Solar hydraulic unit
Channel Meaning
ODB Drainback option
ORSI System cooling option
ORA Accumulator cooling option
OT1 Option thermostat 1
CA1O Connection temperature thermostat 1
CA1F Shutdown temperature thermostat 1
TIR Thermostat 1 cooling
t1O1 Thermostat 1 connection time 1
t1F1 Thermostat 1 shutdown time 1
t2O1 Thermostat 1 connection time 2
t2F1 Thermostat 1 shutdown time 2
t3O1 Thermostat 1 connection time 3
t3F1 Thermostat 1 shutdown time 3
ODT Thermal disinfection option
REL1 Signal type from R1
MIN Minimum speed
MAX Maximum speed
MAN1 Manual mode R1
MAN2 Manual mode R2
IDIO Language
9.4.1 Settings
Once the filling procedure is complete, the hydraulic unit must be
connected to the power supply.
Although the system is configured in the factory, if the control is reset, the
first time that the control is switched on, the initialisation phase begins
(during which the central key flashes red) and the commissioning menu
launches automatically.
The commissioning menu guides the user through the key adjustment
parameters required to operate the system.
The commissioning menu comprises the parameters described below. To
make an adjustment, set the desired value using the central dial and press
the right-hand key to confirm. The following parameter will appear on the
screen.
Language
Select the language required.
Factory set­
ting
OFF
OFF
OFF
ON
40 ºC
45 ºC
OFF
07:00
08:00
11:00
12:00
18:00
20:00
OFF
SOL
30%
100%
Auto
Auto
ES
7729335 - 04 - 12052021