Advertisement
Troubleshooting: General
• Follow the
Block Diagram
• Check for loose/bad connections.
• Test the easiest components first. (power, key switch, DC-DC converter)
• Mower should be fully charged (if possible)
• Before disassembly:
– Attempt to charge mower (note any error LED indications)
– Check for voltage at charge port.
– Check
USB Indicator
12V converter)
Remove
Instrument Panel
•
Test Key Switch
–
Check all other connections while panel is removed.
–
< Table of Contents
on the previous page.
and
Headlights
are functional (this tests the 48V-
cover
8
Advertisement
