Advertisement
IMPORTANT: If the main fuse is blown, find the source of problem before replacing fuse
Available at Mouser.com:
< Table of Contents
Testing Main Fuse
https://www.mouser.com/ProductDetail/Littelfuse/14256316122?qs=sGAEpiMZZMsh2y49K8ANrTdpOrToc%252bEOWEps5yIgKK0%3d
1. Disconnect main battery connection
2. Open the plastic box to access
main fuse.
3. Set DMM to Resistance
Measure where indicated below.
Ensure the nuts are tight, but not
overtightened, as this can cause the fuse
to twist and break.
If fuse is blown, replace only with the same physical
size and same Amperage and Voltage.
15
Advertisement
