Graco Dyna-Star 26A938 Instructions Manual page 14

Repair
10. Install two gaskets (14) on the manifold (15).
11. Install the manifold (15) (torque 95 - 105 in-lb/10.7 -
11.9 N•m).
12. Align the air valve gasket (16) on the manifold, then
attach the air valve.
13. Tighten the tie bolts (10) halfway. Work in a
criss-cross pattern. Continue to tighten the bolts in
criss-cross pattern and torque to 25 - 30 ft.-lb/33.9 -
40.7 N•m).
14. Lubricate and install pilot valves (19) into the top
and bottom covers (torque 95 - 105 in-lb/10.7 - 11.9
N•m).
15. Install the lift ring (31) and o-ring (32) in the center
of the top cover (13). Lubricate the o-ring.
14 Manual 3A7718A