Table of Contents
Advertisement
(8) Reference "Operation ratio of EHP by each air conditioner (for each hour)" UNITS_yyyymmdd_hh.csv:
This is a csv file contains the result of calculation of operation ratio for each indoor unit regarding 1 cycle or all
cycle as 100%.
(a) Date
(b) Address
(c) Block (No.)
(d) Group (No.)
(e) Load on
Indoor units
(f) Load on
Outdoor units
(g) Indoor /
1 outdoor
(h) Indoor/
All outdoor
(a)
(b) H-LINK No., REFGN cycle,
Address
Date
↓
NOTE:
● If OU using more than 2 REFGN cycles exists, adopt "(h) IU/ALL OU".
11
YYYY, MM, DD, HH
H-LINK number, REFGN cycle, address
Block Name, Block No.
Group Name, Group No.
In Mode I::= Thermo on time x capacity
In Mode II::= Accumulated expansion valve aperture x expansion
valve coefficient
In Mode I::= Thermo ON time in the REFGN cycle x total
capacity
In Mode II::= Accumulated operation current
All indoor units within one particular refrigerant cycle (ratio)
1 unit/ All indoor units in all refrigerant cycle (ratio)
(c) Block Name,
Block No.
4 digits for year, 2 digits each for
month, day and hour
2 digits (In decimal)
2 digits in decimal for No.
First digit: Alphabet
Last two digits: Decimal
8 digits
8 digits
8 digits
8 digits
7 digits, 100% = 1000000
7 digits, 100% = 1000000
(e)
(d) Group Name,
Load on
Group No.
indoor units
↓
(f)
Load on
(g)
(h)
outdoor
IU/1 OU
IU/All OU
units
↓
↓
↓
Advertisement
Table of Contents
