Table of Contents
Advertisement
(5) Reference "operation ratio of GHP by each day" DAYS_GHP_yyyy.mm.csv:
This is a csv file contains the result of calculation of operation ratio in a day regarding maximum 31 days as
100%.
(a) Date
(b) Accumulated
load on outdoor
units
(c) An day/ Elapsed
days
Day 1
(a)
(b)
(c)
Date
Accumulated
An day/
load on
Elapsed
↓
outdoor units
days
↓
↓
(6) Reference "Operation ratio of GHP by each air conditioner (for each day)" (UNITS_GHP_yyyymm.cddsv)
This is a csv file contains the result of calculation of operation ratio for each indoor unit regarding 1 cycle or all cycle as 100%.
(a) Date
(b) Address
(c) Block (No.)
(d) Group (No.)
(e) Load on
Indoor units
(f) Load on
Outdoor units
(g) Indoor /
1 outdoor
(h) Indoor/
All outdoor
(a)
(b) H-LINK No., REFGN cycle,
Address
Date
↓
NOTE:
● If OU using more than 2 REFGN cycles exists, adopt "(h) IU/ALL OU".
9
YYYY, MM, DD
In Mode I::= Grand total of thermo on time x capacity of
each indoor unit.
In Mode II::= Accumulated load on outdoor units
Current date / Total elapsed days
Day 2
Day 3
YYYY, MM, DD
H-LINK number, REFGN cycle, address
Block Name, Block No.
Group Name, Group No.
In Mode I::= Thermo on time x capacity
In Mode II::= Accumulated expansion valve aperture x expansion
valve coefficient
In Mode I::= Thermo ON time in the REFGN cycle x total capacity
In Mode II::= Accumulated operation current
All indoor units within one particular refrigerant cycle (ratio)
1 unit/ All indoor units in all refrigerant cycle (ratio)
(c) Block Name,
Block No.
4 digits for year, 2 digits each for
month and day
12 digits
12 digits
7 digits, 100% = 1000000
Day 4
Day 5
(d) Group Name,
Group No.
indoor units
Day 30
4 digits for year, 2 digits each for
month and day
2 digits (In decimal)
2 digits in decimal for No.
First digit: Alphabet
Last two digits: Decimal
8 digits
8 digits
8 digits
8 digits
7 digits, 100% = 1000000
7 digits, 100% = 1000000
(f)
(e)
Load on
Load on
(g)
outdoor
IU/1 OU
units
↓
↓
↓
Day 31
(h)
IU/All OU
↓
Advertisement
Table of Contents
