Chapter 2
Setup and Installation
Install the Switch
Wall-Mounting
Position the mounting bracket and screw on the side of the switch, rotated
90-degrees from the view shown in the rack-mounting illustration. Tighten the
screw with a screwdriver. Repeat on the opposite side.
Mount the switch on the wall with the front panel facing up. For the best support
of the switch and cables, make sure that the switch is attached securely to wall
studs or to a firmly attached plywood mounting backboard. Screws for
wall-mounting are not provided.
User Guide for the Catalyst Express 500 Switches
2-12
OL-8122-01