Nowy Styl Navigo LP11 Operating Manual page 4

EN
IN ORDER TO SIMPLIFY THE HANDLING OF NAVIGO,
WE HAVE CREATED A BRIEF SUMMARY OF THE FUNCTIONS FOR YOU.
WARNING ! ALL REGULATIONS SHOULD BE PROVIDED WHILE SITTING.
1. Mechanism
Pull down the lever located on the
left side underneath the seat to lock
the tilt angle of the backrest.
Pull up the lever to release the
synchronous mechanism, to achieve
the dynamic sitting effec.
Warning: Dynamic seating, with
open mechanism is optimal for
user's health.
2. Seat height adjustment
For continuous adjustment of seat
height pull up the lever located on
the right-hand side underneath the
seat. Please note: Pneumatic lifts
can only be installed and serviced by
trained personel.
3. Height adjustable backrest
The backrest will engage, means
by the EasiLift, at the required
height setting when pushed
upwards. To re-adjust the backrest
to a lower position, push the
backrest to the highest position
and guide it down to the engaging
position at the bottom.
4. Seat depth adjustment (option)
In order to adjust the seat depth
press the lever located on the left
side of the seat. Then move the seat
to the desired position and release
the lever. The seat will be locked in
this position.
5. Seat inclination adjustment
(option)
In order to set the negative seat
tilt turn twice the knob located on
the left side underneath the seat
to the front. In order to lock the seat
in this position turn this knob once to
the back. In order to switch off this
function turn it to the front to the last
position.
6. Weight adjustment
To adjust backrest tilt force turn the
knob located on the right hand side
beneath the seat clockwise (backrest
tilt force will increase) or counter-
clockwise (backrest tilt force will
decrease).
7. Armrest adjustment
• 2-D ARMRESTS (option)
To adjust the height of the armrests
press the button on the outside of
the armrest. To adjust the armrest
width open the locking lever
underneath the armrest, move the
armrest into the required position
and tighten the lever.
• 4-D ARMRESTS (option)
To adjust the height of the
armrests press the button on the
outside of the armrest. To adjust
the armrest width open the locking
lever underneath the armrest,
move the armrest into the required
position and tighten the lever.
To change the angle of armrest
pad turn the pad to the inside or
to the outside, into the desired
position. To simply adjust the
depth of the armrest pad move the
pad forward or backward into the
desired position.