PASCO OS-8527A Instruction Sheet

Instruction Sheet
for the PASCO
Model OS-8527A
LASER SIGHT ACCESSORY

Introduction

The PASCO OS-8527A Laser Sight Accessory is de-
signed specifically to be used with PASCO projectile
launchers and is an effective accompaniment to Shoot-the-
Target experiments.

Equipment

– Laser Sight Accessory
– 9VDC adapter
Additional equipment recommended:
– PASCO ME-6800 (short range) or ME-6801
(long range) Projectile Launcher
– PASCO ME-6805 Shoot-the-Target Acces-
sory
➤
WARNING: Always wear safety goggles
when you are in a room where the Projectile
Launcher is being used.
The base of the Projectile Launcher must be
clamped to a sturdy surface using the clamp of your
choice. Please refer to the instruction manual for
your PASCO Projectile Launcher for more infor-
mation.
10101 Foothills Blvd. • P.O. Box 619011 • Roseville, CA 95678-9011 USA
Phone (916) 786-3800 • FAX (916) 786-8905 • email: techsupp@PASCO.com
Replacement parts:
Description
Laser Sight Mount
long thumbscrew
short thumbscrew
launcher
base
Figure 1: Laser Sight Accessory Setup
© 1996 PASCO scientific
PASCO part no.
648-06147
617-002
617-015
ME-6800 or ME-6801
Projectile Launcher
(not included)
square nut
OS-8527A Laser
thumbscrew
Sight Accessory
better
ways to
teach science
012-07894A
06/01
$1.00