ANTAIRA STE-6104C Series Quick Start Manual

Antaira Technologies
STE-6104C Series
4-Port Serial Device Server
Quick Start Guide
Version 1.3
(January 2019)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
1. P
ACKAGING
The package contains following items:
•
STE-6104C
•
Quick Start Guide with Warranty Card
•
Product CD
•
7-pin Terminal Block ( 2ESDV-07P) x1
2 H D
ARDWARE ESCRIPTION
Front Panel Layout
Top Panel View
STE-6104C series top panel is equipped with one 6-pin removal
terminal block connector for dual DC power inputs
(12~48VDC).
Product Overview
System Interface/Performance

15KV ESD Protection for Serial Signals

Ethernet connectivity 2*10/100/1000Tx RJ45 ports

Store-and-forward switching architecture

4-Port RS-232/RS-422/RS-485, Baud Rate up to 921 Kbps

Power line EFT protection: 3,000VDC; Ethernet ESD
Protection: 6,000VDC
Power Input & Connection

DC 12 to 48V redundant power, with a 6-pin removal
terminal block

It is recommended to use a UL listed industrial power
supply

Operating Temperature


Standard operating temperature model: -10°C to 70°C

Extended operating temperature model: -40°C to 75°C

Case/Installation


IP50 protection
DIN-Rail mount design

LED Indicators:

Name Color Status
Off Power is not connected
Power Green
On Power is connected
Off Ethernet Disconnected
Green
Data is transmitting on
Blinking
LAN Ethernet for 100Mbps
Data is transmitting on
Orange Blinking
Ethernet for 10Mbps
No data is transmitting on
Off
COM port
COM Green
Data is transmitting on
Blinking
COM port
System is not ready or
Off
halt
RUN Green
AP firmware is running
Blinking
normally

Installation Procedures:

Step 1: Connect STE-6104C to power source
Step 2: Connect STE-6104C to the Ethernet network. Use
a standard straight-through or cross-over Ethernet
cable Always make sure the PC is on the same
network subnet as STE-6104C.
Step 3: Connect STE-6104C's serial port to a serial
device.
Step 4: Mount STE-6104C to a Din Rail.
Description