Download Print this page

ANTAIRA STE-708 Series Hardware Installation Manual

Industrial serial device server
Hide thumbs Also See for STE-708 Series:

Advertisement

Quick Links

Antaira Technologies
Industrial Serial Device Server
STE-708 / STE-716 Series
Hardware Installation Guide
Version 1.0
Updated - November 2014
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
Package Check List
The package contains the following items:
STE-708 / STE-716 Industrial Serial Device Server
Hardware Installation Guide
Product CD
1 * 3-pin Terminal Block (DC models only)
1 * RJ-45 to Male DB9 cable
1 * AC Power Cord (EU / US models only)
4 * Foot Rubbers
1 * Rack Mount Kit
Panel Layout
*STE-708 Series – 8*Serial Ports & STE-716 Series – 16*Serial Ports
LCM Display
Buttons
Function
Opens the main menu
Scroll up
Scroll down
Confirm the selection. When working with IP
addresses, pressing <SEL> means moving to the
next digit.
Installation Overview
1.
Ground the device properly. When using the AC model, the
user can use the grounding screw next to the AC inlet. When
using the DC model, the user can utilize the 3-pin terminal
block. It is required to connect to the grounds at all times to
ensure overall maximum performance.
2.
If the unit requires installing on a rack, the user is required to
secure the rack mount kit on to the unit before placing it on
the rack. If the unit requires installing on a surface, the user
can use the foot rubbers to prevent the device from sliding.
3.
Then user can choose whether to plug in the I/O ports at this
point or at a later time. Next, the user can utilize the
Ethernet cable between the device and the network
(Ethernet switch or PC), and then the user can start setting
up the device.
The openings to the sides are for the device's heat
dissipation. Please never obstruct or cover them with any
objects.
All STE-708/STE-716 series' factory default IP address is
10.0.50.100. Users can access the device by its WebUI
once it is connected to a physical network; or use the serial
manager. For more information on the serial manger,
please refer to the manual. Please note, the user is
required to follow the procedure to setup the PC in the
same subnet, and then use the web console to configure
the device.
Pin Assignments
Serial and RJ-45 Connectors
Ethernet
RS-232
Pin 1
Tx+
RTS
Pin 2
Tx-
DTR
Pin 3
Rx+
TXD
Pin 4
SG
Pin 5
SG
Pin 6
Rx-
RXD
Pin 7
DSR
Pin 8
CTS
RS-422
&
RS-485
RS-485
2-Wire
4-Wire
-
-
TX-
-
TX+
-
SG
SG
SG
SG
RX+
Data+
RX-
Data-
-
-

Advertisement

loading
Need help?

Need help?

Do you have a question about the STE-708 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ANTAIRA STE-708 Series

  • Page 1 Please note, the user is required to follow the procedure to setup the PC in the *STE-708 Series – 8*Serial Ports & STE-716 Series – 16*Serial Ports same subnet, and then use the web console to configure the device.
  • Page 2 Antaira’s Web Sites & Repair/Support Emails: Ethernet is Disconnected For RMA service, customers are required to be responsible for www.antaira.com support@antaira.com the shipping expense for shipping the RMA unit(s) to Antaira; www.antaira.eu info@antaira.eu and Antaira will be responsible for the shipping expense by www.antaira.com.tw info@antaira.com.tw...

This manual is also suitable for:

Ste-716 series