Level Indicator (Option) - Kubota LA525 Assembly Instructions Manual

10 ASSEMBLY INSTRUCTIONS
BLevel Indicator (Option)
1. Remove two original pins from the boom (RH).
(1) Original pin
2. Install PIN 2 and PIN 8 to the boom (RH).
A Make sure the plate of PIN 2 is fitted in its specified
direction, as shown below.
(1) PIN 2
3. Attach the level indicator.
A Make sure the indicator assy. is attached in its
specified direction, as shown below.
(1) Indicator assy.
(2) PIN 8
(3) Split pin
4. Depending on the front attachment, loosen the level
rod lock bolt and readjust the level rod length.
(1) Bolt
(2) Level rod
(3) PIN 2
(4) Hose 10
(5) Hose 11
A Make sure to place the level indicator OUTSIDE hose
10 and 11 or damage to the hose will occur.