Flex FX2131A Operator's Manual page 12

WARNING
making any assembly, adjustments or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
TO ATTACH/DETACH BATTERY PACK (FIG. 2)
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves in the tool, and then slide the battery
pack onto the tool.
NOTICE: Make sure that the latch on the
battery pack snaps into place and that the
battery pack is secured to the tool before
beginning operation.
NOTICE: When placing the battery pack onto
the tool, be sure that the raised rib on the battery
pack aligns with the groove inside the tool
and that the latches snap into place properly.
Improper attachment of the battery pack can
cause damage to internal components.
To detach the battery pack:
Depress the battery-release button located
ATTACHING THE BLADE (FIG. 3)
WARNING
performing any assembly or adjustments or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
WARNING
greater. NEVER use a blade that is so thick
that it prevents the outer blade washer from
engaging with the flat side of the spindle.
Using a blade not designed for the saw may
result in serious personal injury and property
damage.
a. Take the hex key from its storage area. Insert
the hex key into the blade stud.
b. Press the shaft-lock button and turn the hex
key until the lock button engages. The saw
shaft is now locked. Continue to depress the
shaft-lock button, turn the hex key clockwise,
and remove the blade stud and the outer
washer (Fig. 3).
Detach the battery pack
from the tool before
Detach the battery pack
from the tool before
Use only 6-1/2" saw blades
rated 5500/min (RPM) or
ASSEMBLY
Fig. 2
Detach
on the front of the battery pack, to release the
battery pack. Pull the battery pack out and
remove it from the tool.
WARNING
Therefore, remove the battery when the tool
is not in use or when carrying it at your side.
Fig. 3
Saw Shaft
Blade
-12-
Battery-release
Button
Attach
Battery tools are always in
operating condition.
Inner Washer
Outer Washer
Blade Stud
Loosen
Shaft-Lock
Hex Key
Button
Tighten