ADVANCED CONTROLS - RETARDER/PROOFER
The Retarder/Proofer has several options to choose from the control panel.
•
Manual Proof Operation
•
Manual Retard Operation
•
Automatic Retard and Proof Operation
CONTROL
To enter the operation mode, press ON/OFF button
(Fig. 1).
OPERATION MODE:
The LCD panel displays three options after the ON/
OFF button is pressed (Fig. 2).
Fig. 1
START-UP:
ON/OFF - Turn on/off the setup mode.
TEMPERATURE UP or DOWN ARROW - Press to
set the temperature level.
TEMPERATURE WINDOW - Displays the current
temperature. Displays set temperature when being
adjusted.
HUMIDITY UP or DOWN ARROW - Press to set the
humidity level.
HUMIDITY WINDOW - Displays the current humidity.
Displays set humidity when being adjusted.
TIMER NUMBER ARROW - Press to select a timer
(1 to 4).
TIMER START/STOP BUTTON - Press to start/stop
the timer.
TIMERS UP or DOWN ARROW - Press to set the
desired time.
TIMERS WINDOW - Displays the hours and minutes
remaining on the timer.
ARROW BUTTONS - Use with LCD operation.
LCD PANEL - Displays all setup options of the Proofer,
Retarder, or automatic Retard/Proofer operation.
– 7 –
Fig. 2