Parts Detail; Product Specifications - ROHO HARMONY Operation Manual

Cautions
• DO NOT expose the product to high heat, open flames, or hot ashes.
• If the cushion has been in temperatures lower than 32º F (0º C) and exhibits unusual
stiffness, allow the cushion to warm to room temperature.
• DO NOT use the inflation valve as a handle for carrying or pulling the cushion. Carry the
cushion by the the cushion base or by the carrying handle on the cover.

Parts Detail

Package Contents:
Cover (2)
Repair Kit
To order replacement parts, contact your product provider or ROHO, Inc., or visit therohostore.com.

Product Specifications

Materials: Cushion: PVC, made without DEHP; Inflation Valve: nickel-plated brass; Cover: Two-way
stretch top, spacer fabric sides with a zipper, and a non-skid bottom with hook and loop fasteners
to help secure the cushion in the chair. Refer to the care label attached to your cover for material
content.
Width (in.)
HOV1415C
141/2
HOV1615C
161/4
HOV1616C
161/4
HOV1815C 183/4
HOV1816C 183/4
HOV2017C 201/2
Average Weight: 11/4 lbs. (0.6 kg); Height ranges from 11/4 in. (3 cm) to 2.0 in. (5 cm). Range is due to variation
in air cell heights. Measurements based on HOV1815C. NOTE: All measurements are approximate and may
vary depending on level of inflation.
ROHO HARMONY Overlay Cushion Operation Manual
Front
Hand Pump
Depth (in.)
151/2
151/2
16
151/2
161/2
163/4
Back
Cushion: Air Cells
Zipper
Carrying Handle
Product Registration Card
Width (cm)
37.0
41.5
41.5
47.5
47.5
52.0
3
Operation Manual
Depth (cm)
39.5
39.5
40.5
39.5
42.0
42.5