Manual Operation; Power On Sequence And Principles Of Manual Control - KEM TRICOR TCE80 -E Series Manual

4 Manual Operation

4.1 Power On Sequence and Principles of Manual Control

The power up sequence gives the following information, each for about 2 second:
This gives the type of electronics. At the time being the types TCE8001 (low power) and TCE8011 (high power)
are available.
This gives the sensor size. At the time being Sensors from TCM0300 (300kg/h max.) to TCM65k (65,000kg/h
max.) are available
This indicates the SW version of the main processor.
This indicates the SW version of the display processor.
If changes to the settings were made before the last power down and not saved to the backup EEPROM, the
following message appears:
CORIOLIS
TRICOR
TCE8000
SENSOR TYPE
TCM28k
SW MAIN
Rev.: V2.00
SW DISPLAY
Rev.: V2.00
READY
Manual Operation
41