Canon imageFORMULA DR-C225W II Wi-Fi Connection Manual page 4

If the access point does not supports
the WPS function, make the access
point settings manually to establish
connections.
See "Connecting to a Specified Access
Point" on p.16
1-to-1 connection (AP mode connection)
Search for the scanner and connect to it
using your computer's wireless
connections feature.
See "Connecting using the AP Mode"
on p.23
Search for and connect to the scanner
from a smart device (smart phone or
tablet).
See "How to Connect Smart Devices"
on p.24

The scanner can be shared with multiple computers on the
same network via the access point, although only one can
connect to the scanner at a time.

The scanner's Wi-Fi and USB connections cannot both be
used at the same time. When connecting with Wi-Fi, the
scanner cannot be used by a computer connected via USB
cable.

When using a Wi-Fi connection, scanning is slower than with
the USB connection.

Install NetworkMonitor on the computer from which you are
using the scanner.
4