Advertisement
the USB connector to the computer. Confirm the port number in device
manager (If the port number is more than COM10 , please modify to the
available number which within COM10 ).
Open the software ——"UPDATE FOR 3AXIS"。
3.
4.
The interface of the software is shown in following picture.
5.
Choose the correct port number and the correct baud rate-115200,
then click OPEN button to open the com port.(The serial port number
should be the same as the port number which checked in step 2).
Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd.
http://www.feiyu-tech.com
- 2 -
service@feiyu-tech.com
Advertisement
