Download Print this page

Advertisement

Quick Links

WEDGE™ MODELS:
WSW130
WSW260
WSW390
WSW4120
STAINLESS STEEL TROUGH
ADA/OBC COMPLIANT
Important: Some options may slightly alter installation. To ensure proper installation review the manual
thoroughly and verify rough-ins before beginning any work. File this manual with the owner or maintenance
personnel upon completion of installation.
Industry standard wall backing, for wall hung fixtures, is required. Installer provided wall anchors and wall
anchoring hardware must be appropriate for wall construction, and have a minimum pull-out rating of 1000 lbs.
(453.6 kg).
ANSI, UFAS or ADA compliance is subject to the interpretation and requirements of the local code authority and
is the responsibility of the installer for verification.
Prior to installation, supply lines must be flushed of all foreign material such as pipe dope, chips, or solder.
Debris or foreign material in water supply may damage valve.
Teflon tape is recommended on all threaded waste and supply connections to reduce the possibility of leaks.
NOTE: When applicable, receptacle(s) must be wired to a GFCI protected circuit. Fixture must be earth
grounded per N.E.C. (National Electrical Code).
Acorn warrants that all of its products are guaranteed against defective material or poor workmanship for a
period of one year from date of shipment. Acorn's liability under this warranty shall be discharged by
replacing without charge F.O.B. City of Industry, California, any goods, or part thereof, which appears to the
company upon inspection to be of defective material or not of first class workmanship, provided that claim
is made in writing to the company within reasonable period after receipt of the product. Where claims for
defects are made, the defective part or parts shall be delivered to the company, prepaid, at City of Industry,
California for inspection. Acorn will not be liable for the cost of repairs, alterations or replacement, or for
any expense connected therewith made by the owner or his agents, except upon written authority from the
Acorn City of Industry office. Acorn will not be liable for any damages caused by defective materials or poor
workmanship, except for replacements, as above provided. Contact local Acorn Representative for
complete terms and conditions.
Part #: 5914-000-001
WARRANTY INFORMATION
TOLL FREE 800-743-8259 • LOCAL 626-855-4866 • FAX 626-855-4863
Page 1 of 11
INSTALLATION, OPERATION
& MAINTENANCE MANUAL
Model Shown: WSW130-SW000-F60
N E O - M E T R O
15125 Proctor Ave. • City of Industry, CA 91746 USA
TF 800.488.8999 • PH 626.336.4561 • FX 626.961.2200
®
b y A C O R N
Acorn Engineering Company
NEO-METRO FIELD SERVICE
Date: 04/12/21
®

Advertisement

loading
Need help?

Need help?

Do you have a question about the Neo-Metro WEDGE WSW130 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Acorn Neo-Metro WEDGE WSW130

  • Page 1 Acorn City of Industry office. Acorn will not be liable for any damages caused by defective materials or poor workmanship, except for replacements, as above provided. Contact local Acorn Representative for complete terms and conditions.
  • Page 2 INSTALLATION, OPERATION & MAINTENANCE MANUAL ACCESSIBILITY COMPARISONS ACCESSIBILITY COMPARISONS 21 5 8 " 1 1 4 " 21 5 8 " (549) 12 1 2 " 1 1 4 " (32) (549) 12 1 2 " (318) (32) (318) 19 1 4 " 19 1 4 "...
  • Page 3 INSTALLATION, OPERATION & MAINTENANCE MANUAL WSW130 TECHNICAL DIMENSIONS TOP VIEW NOTE: Fixture profile will conform with the following 5 " 15" Standards when mounted at recommended Rim [127] [381] " height shown. Consult Local Codes for complete 10" [67] requirements. [254] "...
  • Page 4 INSTALLATION, OPERATION & MAINTENANCE MANUAL WSW260 TECHNICAL DIMENSIONS NOTE: Fixture profile will conform with the TOP VIEW f o l l o w i n g S t a n d a r d s w h e n m o u n t e d a t 30"...
  • Page 5 INSTALLATION, OPERATION & MAINTENANCE MANUAL WSW390 TECHNICAL DIMENSIONS NOTE: Fixture profile will conform with the following Standards when mounted at TOP VIEW recommended Rim height shown. Consult 45" [1143] Local Codes for complete requirements. 15" 30" 2 5 8 " [381] [762] 5 "...
  • Page 6 INSTALLATION, OPERATION & MAINTENANCE MANUAL WSW4120 TECHNICAL DIMENSIONS NOTE: Fixture profile will conform with the following Standards when mounted at TOP VIEW recommended Rim height shown. Consult Local Codes for complete requirements. 60 " [1524] 15" 30" 30" " [381] "...
  • Page 7 INSTALLATION, OPERATION & MAINTENANCE MANUAL FIXTURE ANCHORING IMPORTANT: Industry standard wall backing for wall hung fictures is required. Installer provided wall Locate and mount the Mounting Bracket to a finished wall. Anchoring anchors and wall anchoring hardware must be Hardware is provided by installer to suit wall conditions. appropriate for wall construction and have a minimum pull-out rating of 1000lbs (454kg).
  • Page 8 INSTALLATION, OPERATION & MAINTENANCE MANUAL WASTE PLUMBING Attach P-Trap Enclosure Cover to Basin Assembly using 1/4 - 20 UNC x 3/4" Screws (Provided). IMPORTANT: To open P-Trap Enclosure and access components located within, remove upper and front screws while supporting the front of the cover. Cover is hinged and will swing down when supported with the lower mounting screw only.
  • Page 9 INSTALLATION, OPERATION & MAINTENANCE MANUAL TROUBLE SHOOTING FOR 9 VOLT DC SENSOR OPERATED VALVES Normal Valve Function: 9 Volt DC sensor operated valve has flow time of 90 seconds maximum. To reactivate, the user must move out of and return to the sensing area. CONDITION: WATER DOES NOT FLOW Indicators Probable Cause...
  • Page 10 INSTALLATION, OPERATION & MAINTENANCE MANUAL TROUBLE SHOOTING FOR OPTIONAL PUSHBUTTON OPERATED VALVES Normal Valve Function: Hand pushbutton operated valve has an adjustable flow time from 5 to 60 seconds. CONDITION: WATER DOES NOT FLOW Probable Cause Solution Water main closed. Open water main.
  • Page 11 INSTALLATION, OPERATION & MAINTENANCE MANUAL CARE AND CLEANING OF STAINLESS SOAP SYSTEMS Acorn soap reservoirs and dispensers provide a dependable STEEL SURFACE operation over long term when proper maintenance is NORMAL CLEANING performed and the correct soap is being used. The most...