Installing And Removing A Memory Module; Memory Population Table - Gigabyte MD72-HB2 User Manual

1-4-2 Installing and Removing a Memory Module

Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on this motherboard.
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
Note: DIMM must be populated in sequential alphabetic order, starting with bank A0.

1-4-3 Memory Population Table

Type
RDIMM
RDIMM
RDIMM
RDIMM
RDIMM 3DS
LRDIMM
LRDIMM 3DS
Hardware Installation
2
Ranks Per DIMM and
DIMM Capacity (GB)
Data Width
SRx8 8GB
SRx4 16GB
DRx8 16GB
DRx4 32GB
2H-64GB
(4R/8R)x4
4H-128GB
QRx4 64GB
(4R/8R)x4 4H-128GB
1
8Gb 16Gb
16GB
32GB
32GB
64GB
2H-128GB
4H-256GB
128GB
2H-128GB
4H-256GB
- 14 -
2
Speed (MT/s); Voltage (V);
Slots per Channel(SPC) and
DIMM per Channel (DPC)
1DPC
1.2V
3200
3200
3200