Using The Appliance - Exido 245-092 Manual

USING THE APPLIANCE

Heating of milk
1. Remove the lid (1).
2. Install the stirrer (9) in the base of
the jug (4).
3. Pour the desired quantity of milk
into the appliance.
o Do not fill the appliance above
the top mark (3) on the inside
of the edge (240 ml). Always
ensure that the amount of milk
exceeds the bottom mark.
4. Check that the silicone seal (2) is
correctly fitted to the lid and seals
properly.
5. Close the lid and ensure that it
clicks into place.
6. Place the appliance on the base (7)
and connect the appliance.
7. Press the "start/pause" (6) button
to switch on the appliance. The two
indicator lamps (5) are lit and the
appliance will start heating the milk.
8. The appliance will turn off
automatically a few seconds after
the milk has reached the optimum
temperature (approximately 70
It takes around 2 minutes.
9. Leave the appliance to cool for two
minutes before using it again.
10. Remove the plug from the socket
and allow the appliance to cool
after use.
11. Clean all parts before storing the
appliance. See "Cleaning".
Heating and frothing of milk
1. Remove the lid.
2. Fit the whisk (8) into the base of the
jug.
3. Pour the desired quantity of milk
into the appliance.
o Do not fill the appliance above
the middle mark on the inside
of the jug (115 ml). Always
ensure that the amount of milk
exceeds the bottom mark.
4. Check that the silicone seal is
correctly fitted to the lid and seals
properly.
5. Close the lid and ensure that it
clicks into place.
6. Place the appliance on the base
and connect the appliance.
7. Press the "Start/pause" button
to switch on the appliance. The
two indicator lamps are lit and the
appliance will start heating the milk.
8. The appliance will turn off
automatically a few seconds after
the milk has reached the optimum
temperature (approximately 70° C).
It takes around 2 minutes.
o
C).
9. Leave the appliance to cool for two
minutes before using it again.
10. Remove the plug from the socket
and allow the appliance to cool
after use.
11. Clean all parts before storing the
appliance. See "Cleaning".
Frothing of milk
1. Remove the lid.
2. Fit the whisk into the base of the
jug.
3. Pour the desired quantity of milk
into the appliance.
24