9.24. Removal of Plasma Display
Panel
The C1,C2,C3 Boards are connected with the plasma dis-
play panel for the repair.
1. Disconnect the Fan Relay Connectors.
2. Remove 8 screws and then remove the Fan Block (1, 2).
3. Disconnect the connectors (DN3, DN5, DN9).
4. Remove the flexible cables from the connectors (DN1,
DN2).
5. Remove 4 screws and then remove the DN-Board.
6. Remove 3 screws and then remove the PB-Board.
7. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
8. Remove 6 screws and then remove the Slot Block.
9. Disconnect the connector (D25).
10. Remove the flexible cables from the connectors (C21,
C22, SC20).
11. Remove 4 screws and then remove D-Board.
12. Remove 2 screws and then remove the Speaker Terminal
Block (L, R).
29
TH-58PF12UK