Panasonic TH-60PF30W Service Manual page 28

TH-60PF30W
9.20.1. Removal of Front Glass
1. Remove 25 screws and then remove the Fixed Angles
(left, right, top, bottom).
2. Remove the Front Glass.
Note: when fixing Fixed Angle
• When attaching the Fixed Angle, attach it in order of 1-2-
3.
• When attaching the Fixed Angle (left, right), attach it in
an outside direction.
Note: when Front Glass is exchanged
• Paste the Sponges (Front Glass) in order along each
Fixed Angles left and right, top and bottom.
Note
• The sponges are parts which cannot be recycled. Please
use the new article when you exchange the Front Glass.
9.20.2. Removal of V1-Board and V2-Board
1. Remove 10 screws and then remove the Fixed Angle
(bottom).
2. Remove 2 screws (D).
3. Disconnect the connector (V11).
4. Remove 1 hook and then remove V1-Board.
5. Remove 2 hooks and then remove the Power Button
Shield.
6. Remove 3 hooks and then remove the Power Button and
Power Button Spring.
7. Disconnect the connector (V22) and then remove V2-
Board.
8. Remove 2 hooks and then remove the 5 Key Button from
V2-Board.
9.20.3. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V2-Board.
(Refer to Removal of V1-Board and V2-Board)
28