Advertisement
Sneeze Guard with Adjustable Pass-Through
1
Assemble Bracket A and B by inserting the Hex Machine Screws through
the holes at the base of Bracket B and into the threaded inserts at the
base of Bracket A. Do this for both sets of brackets.
Hex
Machine
Screw
Qty: 4
2
Place the Lower Shield in the space between brackets A and B. Moving
the shield as needed, insert the Carriage Bolt through the bottom hole on
the shield and slot on Braket A. Attach the T-knob to the Carriage Bolt
from the outside and tighten in place. Repeat this for the other side.
Carriage Bolt
Qty: 2
T-knob
Qty: 2
To adjust Lower Shield, untighten T-knobs 1/4 of a turn while holding on to shield.
Move shield to desired height and re-tighten T-knobs.
Lifetime
Quantity
Assembled
Warranty
Discounts
Assembly Instructions
Fast
in USA
Shipping
Contact us
Local: 310-353-7100
Toll Free: 888-929-0322
Fax: 310-353-7109
Support@VersaTables.com
Advertisement
