Steps
1. Insert the power button switch into the slot from the front-side of the chassis.
2. Push the power button in until you hear a click from the retention tabs.
3. Connect the power button cable to the connector on the system board.
Next steps
1. Install the
front
bezel.
2. Install the
side
cover.
3. Follow the procedure in
Intrusion switch
Removing the intrusion switch
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the intrusion switch and provides a visual representation of the removal procedure.
56
Disassembly and reassembly
After working inside your
Before working on your
computer.
computer.