3. Follow the procedure in
3.5-inch hard drive
Removing the 3.5-inch hard-drive assembly
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the 3.5-inch hard-drive assembly and provides a visual representation of the
removal procedure.
Steps
1. Disconnect the data and power cables from the 3.5-inch hard-drive.
2. Remove the four (#6-32) screws that secure the 3.5-inch hard-drive.
3. Lift the hard-drive assembly away from the chassis.
Installing the 3.5-inch hard-drive assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
After working inside your
Before working on your
computer.
computer.
Disassembly and reassembly
29