Marley EM-JA019 Operating Instruction page 5

Powering On the master speaker
Use the supplied mains adaptor to connect to the DC IN socket at the back of the unit and
insert the plug into your household outlet.
"POWER ON", device power on.
Note: Check the rating plate on the AC/DC adapter with your mains power voltage before
powering the speaker on.
2. After 5 minutes without any operation, the speaker will automatically turn off the power.
Powering On the slave speaker
1. A 7.2V 5200mA DC rechargeable lithium battery is included with the speaker.
2. When the lithium battery is low, the red LED indicator flash. You can use USB cable to
charger the lithium battery.
 Use a TYPE C USB cable to plug one end with USB into the computer USB port. Plug the
other end with TYPE C USB into TYPE C USB jack of the unit. It will start to charge the
Lithium battery automatically when your computer is ON.
You can also use a TYPE C USB cable and charger to charge the device.
3. While charging, the CHARGING
is fully charged.
NOTE: Before the first use, we recommend you charge the Lithium battery for 6 - 8 hours.
Please do not charge the battery longer than recommendation as it will shorten the battery
life.
Listening to music by Bluetooth
1. Long press Power button for 2 seconds, device power on, blue LED indicator flash, enter
Bluetooth pairing.
NOTE:
 Automatically enter Bluetooth pairing after power on
 It will automatically reconnect
2. Turn on the Bluetooth function on your external device
NOTE: The effective distance between your external device and this speaker is 10 meters
(33ft.)
3. Wait moment for "Get Together Duo."
to connect the speaker.
NOTE: Sometimes a window will ask you for a pass word. Fill in "0000" then press "OK" on
your external device.
4. After the Bluetooth pairing successful, voice prompt "PAIRED", the
always lights up. Then you can select what you want to play on the external device.
5. Short press VOL+/ VOL - adjust the volume increase/decrease volume.
16 steps adjustable for volume level
NOTE: First power on for using, the default volume is 60%, after first usage, the volume
The red power indicator lights up, voice prompt
indicator light is always
to appear on the device list. Press
on. It will turn off when the battery
"Get Together
blue LED indicator
Duo."