Before Use:
The equipment consists of two speakers.
One is the right speaker, which is powered by a built-in rechargeable lithium battery; If the
battery is depleted, the lithium battery can be charged via a USB cable.
device.
The other is the left speaker, which is powered by a power adapter.
adaptor to DC IN 15.0V 0.8A socket on the back of the radio. Then insert the mains plug into
the wall outlet whose voltage matches the voltage stated on the rate plate of the device.
speaker is master device.
The two speakers can be used separately. And also use the TWS function to network together.
Drawing Line:
Speaker left (master device)
EM-JA019L
1. VOL-/ fast backward
2. VOL+/ fast forward
3. TWS/ Play/pause button
4. On /off/ function switch (Bluetooth /AUX IN
/LINE IN)
5. Function indicator (Blue—Bluetooth;
RED—AUX IN; PURPLE—LINE IN)
6. Power light
7. DC IN jack
8. AUX IN
9. Line-in
Speaker right (slave device)
EM-JA019R
1. VOL-/ fast backward
2. VOL+/ fast forward
3. Play/pause
4. On /off/ function switch (Bluetooth /AUX IN
/LINE IN)
5. Function indicator (Blue—Bluetooth;
RED—AUX IN; PURPLE—LINE IN)
6. Charge lamp
(Charging, indicator light is
always on; The full charge indicator went out)
7. USB charge jack
8. AUX IN
9. Line-in
This speaker is slave
Connect the mains
This