Display; Initial Settings - ABB TS3 Instruction Manual

6.4 Display

TS3 automatically recognize the cable version connected to the main connector, ready to test the proper trip unit types.
Example.
After the connections of PR23X - PR33X test cable to the extension cable and to the frontal main connector, the
following screen will be presented
In the below Figure 3, is highlighted the subdivision in areas.
Main Area
Help information on the current function
In this Example, it is possible to access to Report, Setup, Info menu pressing the F1 F2 F3 keys.

6.5 Initial settings

The correct selections of the necessary parameters are under user care.
!
Some parameters are directly accessible during Test setup phase, others a accessible on Setup menu,
that can be reached with F2 key (see figure 3)
888.902.6111
Figure 3
TS3 1SDH000670R0002
www.intellirentco.com
|
Soft-Key corresponding to the
function keys
L3852 17/44