Knob And Keys Use; Default Settings - ABB TS3 Instruction Manual

5.7.1

knob and keys use


: "UP " "DOWN " for unit value increase or for menus navigation.
 
: "LEFT" "RIGHT" for menus navigation.

: "Shift" to select alphabetic characters (grey area of keyboard)
Once in the require page, the adjustable values can be selected using the knob and/or the direction  keys (the
adjustable field is indicated with the cursor =>), the parameter is highlighted by pressing the ENTER key, and modified
using alphanumeric keys, and confirmed with ENTER key.
ESC : press ESC to exit the parameter changing phase, aborting the change and go back to previous menu.
DEL : press DEL to cancel the inserted parameters in alphabetic mode.
START/STOP : press START/STOP to start or stop immediately an ongoing test.
F1 F2 F3 F4 : press F1 F2 F3 F4 function keys to enter in soft key menus.
5.7.2

Default Settings

ABB SACE provides the TS3 with the following adjusted parameters:
Label Value
Nominal power Voltage 230Vac
Itest 0,4In
Phase L1

Timeout
Frequency 50 Hz
Beep On
Password 00000
Table 7. Default setting
888.902.6111
TS3 1SDH000670R0002
www.intellirentco.com
|
L3852 13/44