Coffee dispensing
(with filter holder)
After turning on and pre-heating the machine, pro-
ceed as follows:
• Insert the universal cup filter 17d in the filter holder
17a and fill it with a level measure of ground coffee
blend using the meas-urer 17c, press down
with the tamper 17b.
17a
17c
17d
• Remove any excess coffee around the filter.
• Reposition the filter holder as indicated in the pre-
heating phase.
• Place one or two cups on the grid underneath the
filter holder and press the coffee switch.
• Wait until the quantity of coffee is sufficient and
press the coffee switch again.
• Take out the filter holder and throw away the re-
sidual coffee.
10 - 16
Hot water dispensing
(preparation of hot beverages)
After turning on and pre-heating the machine, pro-
ceed as follows:
• Position the steam tube with nozzle turned towards
• Place a cup under the steam tube.
17b
• Turn the steam knob counter-clockwise and press
• After obtaining the desired amount of hot water,
850005 - 850010 - 860004 - 850009 - 860006 - 860004
the grid.
the coffee switch to start the flow of hot water.
press the coffee switch again and turn the steam
knob clockwise.