Safety Instructions - AGP Intex Giraffe GHOST Operation Manual

Drywall sander
Table of Contents

Advertisement

1.
Power Button
2.
Motor On/Off Button
3.
Speed Selector Buttons
4.
Indicator Screen
5.
Main Handle
6.
Vacuum Swivel Mount
7.
Power Supply Cord
8.
Shaft
9.
Motor
10.
Brush Skirt (rotatable)
11.
Half-Moon Door
9
11
10
Intex Giraffe
GHOST Drywall Sander
®
Code
AGHOST
Voltage
110-120V or 220-240V ~ 50-60Hz
Power Input
430W
No-Load-Speed
1000 - 1600 min
-1
Sanding Head
Ø 215mm
Sanding Disc
Ø 225mm
Unit Weight
2.8kg (6.17lbs)
Unit Dimensions
1430 x 254 x 157mm
2
Intex Giraffe
GHOST
intexinternational.com
®
1
3
2
8
6
7
E
x2
AGHOST C O N T E N T S
A
x1
GHOST
Drywall Sander
H/D Vacuum Hose - 4 .3m
Velcro Interface Pad
6mm L-Hex Key
H/D Cushioned Carry Bag
B
B
x1
Operation Manual
C
x1

SAFETY INSTRUCTIONS:

WARNING!
Read all safety warnings and instructions. Failure to follow
the warnings and instruction may result in electric shock, fire and or
serious injury.
Save all warnings and instructions for future reference.
The term power tool in the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1. Work Area Safety
a
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b
Do not operate power tools in explosive atmospheres, such as in the presence of power tools create sparks
which may ignite the dust or fumes.
c
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
d
Never leave the electric power tool unattended. Only leave the machine when the tool in use has come to a
complete standstill.
2. Electrical Safety
a
Power tool plugs must match the outlet. Never modify the plug in any way.
Do not outlets will reduce risk of electric shock.
b
Avoid body contact with earthed or grounded surfaces such as pipes, radiators,ranges and refrigerators.
5
There is an increased risk of electric shock if your body is earthed or grounded.
c
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
d
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edge or moving parts. Damaged or entangled cords increase the risk of electric shock.
e
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
f
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3. Personal Safety
a
Stay alert, watch what you are doing and use common sense when operating a power tool.
Alcohol or medication: A moment of inattention while operating power tools may result in
serious personal injury.
b
Use personal protective equipment. Always wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c
Prevent unintentional starting. Ensure the switch is in the Off position before connecting to power
source and /or battery pack, picking up or carrying the tool. Carrying power tools with your finger on
the switch on invites accidents.
d
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in personal injury.
e
Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
f
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g
If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of these devices can reduce dust-related hazards.
h
Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore, tool safety
principles. A careless action can cause severe injury within a fraction of a second.
WARNING: To reduce the risk of injury user must read and understand operator's manual.
3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Intex Giraffe GHOST and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Aghost

Table of Contents