Table of Contents
Advertisement
Checking the body insulation
Burner with flue gas connector FLUP
1
2
Burner with eductor
1
2
4 Follow the reverse procedure when reassem-
bling.
▷ If possible, carefully check the body insulation
from the front for signs of damage.
26
5 If the insulation is worn or damaged, it must be
replaced.
Checking/replacing the air guide tube LFR
and recuperator
ECOMAX
®
. .C
CAUTION
Risk of breakage. The air guide tube and recu-
perator in the ECOMAX
material.
1
3
4
5
3
3
®
..C are made of ceramic
2
5
▷ If any ceramic components are damaged, they
must be replaced.
▷ To check the body insulation carefully and replace
the recuperator, remove the burner and suspend
it vertically, e.g. on two beams.
6
Checking the insulation
9
▷ If the insulation is worn or damaged, it must
be replaced.
8a
8c
a
b
GB-13
Check the
recuperator.
7
8
10
11
8b
Remove the
body insula-
tion from the
front.
8d
Ensure that the
flue gas
insulation is
installed in the
correct position.
a < b
Advertisement
Table of Contents
