Solution Description: Activating The Outputs - Siemens SIMATIC S7-200 Getting Started

Sequencer

5.16 Solution description: Activating the outputs

5.16 Solution description: Activating the outputs
Program section 2 - Setting the outputs
58
Activate output Q0.0 (drive clockwise)
Output Q0.0 is "1" in steps 1, 2, 3, 4, i.e. if
M0.1 or M0.2 or M0.3 or M0.4 are "1".
Activate output Q0.1(direction reversal)
Output Q0.1 is "1" in steps 3 and 4, i.e. if
M0.3 or M0.4 are "1".
Activate output Q0.2(feed on)
If memory bit M0.2 = "1" output Q0.2 will
become "1".
Getting Started - Advanced
Training Documents, 09/2007, A5E01469795B