Main Technical Information; The Main Technical Parameters; Welder Installation; Installation Environment - ANDELI TIG-250MGLC User Manual

Main technical information

1、The main technical parameters
Power Supply Voltage(V)
Frequency(Hz)
No-Load Voltage(V)
Rated Input Power(KW)
Rated Input Current(A)
Welding Current Range(A)
Duty cycle （% 40℃
10min）
Power Factor
Efficiency(%)
(For hidden parameters,please refer to the parameter table below )

Welder installation

1．Installation Environment
(1) The welding operation should be carried out in a relatively dry
environment. The relative humidity of the air should not exceed 90%
at 20 ° C and 50% at 40 ° C.
(2) The ambient temperature during welding should be between -10 ° C and
+ 40 ° C, and between -20 and + 55 ° C during storage and
transportation.
(3) Avoid use in direct sunlight or in the rain in the open air, and do
not allow rainwater to penetrate into the welding machine.
MODEL
Function
40%
100%
TIG-250MGLC
TIG
AC220V±15%
50/60
4.1
18.5
5-170
170A/16.8V
108A/14.3V
- 9 -
MMA
56
5.6
25.3
10-150
150A/26V
95A/23.8V
0.7
85