Supply Voltage Quality; Power Input - ANDELI TIG-250MGLC User Manual

(4) Avoid gas shielded welding operations in environments with strong air
flow.
(5) The inclination of the welding power source should not exceed 100,
and the altitude should not exceed 1000m.
(6) Avoid working in the environment with large dust, acid and corrosive
gas.
(7) The welding machine is more than 20cm away from the wall, and the
distance between the welding machine is more than 10cm.
2．Supply voltage quality
(1) The waveform should be a standard sine wave, the effective value is
220V15%, and the frequency is 50Hz / 60Hz.

3. Power input

In the above table, the squares of the input, output, and ground wires
increase correspondingly with the longer cable length.
Note: The capacities of fuses and circuit breakers in the above table
Model
Input power
Grid minimum capacity
fuse
Input
protection
breaker
Input
side
Output
Cable
side
Ground
wire
TIG-250MGLC
AC220V±
15%,50/60Hz
10
63
63
2
4mm
2
25mm
2
4mm
- 10 -