Hardware Reference; Front Panel - EEG iCap HD492 Manual

Hardware Reference

Front Panel

Power Switch
Power On LED
Active
Active On LED
LCD Screen
There is one power switch on the rear panel for each power cable connected
to the unit.
There is one power LED for each power supply connection provided with the
unit
Toggles the Encoder between active operations and Relay Bypass mode. In
Relay Bypass mode, the signal at the master video input is routed directly
through to the master video output, while the signal at the auxiliary video
input is routed directly through to the auxiliary video output. Video output 2
is inactive.
The Active On LED will light green when the unit is in active operating mode.
The LED will turn off when the Encoder is in Relay Bypass mode.
The LCD Screen provides access to the unit's front panel configuration menu.
Status information is displayed when the menu is not in use. Press the "check
mark" button to enter the menu at any time.
Copyright © 2021 EEG Enterprises, Inc.
All Rights Reserved.
30