Record / Store As-Run Caption Data (Ccrecord Module) - EEG iCap HD492 Manual

Record / Store As-Run Caption Data (CCRecord Module)

CCRecord creates real time as-run recordings of caption data running through the encoder, in a variety of popular
caption file formats. Captions recorded may be locally inserted to the video through iCap, telnet, or dial-up
mechanisms (encoders only), or they may be present on the input video, and will always reflect the data encoded
on the output of the master video signal.
To determine if CCRecord is installed on your unit, access your encoder's web interface, look for an entry that says
CCRecord on the left side menu and select it. If you are prompted for a license key, the feature is not installed and
can be purchased by contacting the EEG sales team.
The recording in and out times for CCRecord files are triggered in real time through one of four GPI switches. The
switch number is configurable, to provide maximum flexibility with a variety of encoder module configurations.
The switch is used to begin recording on the rising edge, and to end a recording on the falling edge. A new
recording can be engaged immediately once the prior recording is ended.
Each recorded file is named based on the ANSI timestamp string representing the beginning of the recording. Files
can be stored locally on the unit until downloaded, or automatically transferred with FTP. When recording begins,
each file begins counting SMPTE drop-frame time code at a default start time of 01:00:00.00.
Further documentation for this feature may be found at https://eegent.com/support/resources
Figure 13: CCRecord Settings on the Web Interface
21 Copyright © 2021 EEG Enterprises, Inc.
All Rights Reserved.