Transmission Test With The Gateway - finder BLISS2 User Manual

TRANSMISSION TEST WITH THE GATEWAY

With the display off, press
the point to turn the
display on.
The "association" function will be
shown as it is the first item.
Scroll on using the right arrow.
Press the point to
access the internal
menu.
Press the point to start
the signal test.
The "humidity" section will be
displayed as it is the first item
in the menu. Press on the right
arrow to move on from
the RH section.
RESULT OF THE TRANSMISSION TEST WITH THE GATEWAY
0 SIGNAL ABSENT: the gateway is unreachable
1/6 POOR: bring the two devices closer
7/8 GOOD: make changes only if errors are found
9/10 VERY GOOD: stable connection
Scroll the menu to the device settings
icon and press the point.
9