Epson ET-2850 Series User Manual page 155

Solving Problems
Edges of the Image are Cropped During Borderless Printing
Because the image is slightly enlarged, the protruding area is cropped.
Solutions
Select a smaller enlargement setting.
❏ Windows
Click Settings next to the Borderless checkbox on the printer driver's Main tab, and then change the
settings.
❏ Mac OS
Change the Expansion setting from the print dialog's Print Settings menu.
The Position, Size, or Margins of the Printout Are Incorrect
The following causes can be considered.
The paper is loaded incorrectly.
Solutions
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
"Loading Paper in the Rear Paper Feeder" on page 25
&
The size of the paper is set incorrectly.
Solutions
Select the appropriate paper size setting.
The margin setting in the application software is not within the print area.
Solutions
Adjust the margin setting in the application so that it falls within the printable area.
"Printable Area" on page 205
&
>
Printing, Copying, and Scanning Quality is Poor
>
Print Quality is Poor
155