End Time Adjustment; Child Lock; Anticrease+ - Beko WUE 8622 XW User Manual

C
INFORMATION
• This is not a washing programme. It is a maintenance programme.
• Do not run this programme when there are any objects in the machine. If you try to do so,
the machine will automatically detect that there is load inside and abort the programme.

• Child Lock

You can prevent children from tampering with the machine by using the Child Lock feature. Thus you
can avoid any changes in a running programme.
C
INFORMATION
• If the Programme Selection knob is turned when the Child Lock is enabled, "Con" appears
on the display. While the Child Lock is enabled, you cannot make any change in the
programmes, the selected temperature, the speed or the auxiliary functions.
• Even if another programme is selected with the Programme Selection knob while the
Child Lock is enabled, previously selected programme will continue running.
To enable Child Lock:
Press and hold the Auxiliary Function button 2 for 3 seconds. While you're holding the
button pressed for 3 seconds, C03, C02 and C01 will be displayed respectively.Then, "Con"
will be displayed to warn the user that child lock is enabled.If you press any button or turn
the Programme Selection knob while the Child Lock is enabled, the same warning will be
displayed.
To disable Child Lock:
Press and hold the Auxiliary Function button 2 for 3 seconds while the programme is running. While
you're holding the button pressed for 3 seconds, C03, C02 and C01 will be displayed respectively.
Then, "COF" will be displayed to warn the user that child lock is disabled.
C
INFORMATION
• In addition to the method above, to deactivate the Child Lock, switch the Programme Selection
knob to On/Off position when no programme is running, and select another programme.
• Child Lock will not be disabled after a power failure or unplugging.

AntiCrease+

•
If you press and hold the auxiliary function button 3 for 3 seconds, this function will be selected
and the programme follow-up light of the relevant programme will turn on. When this function
is selected, the drum will rotate for up to eight hours to ensure that the clothes do not crease at
the end of the programme. At any time during these eight hours, you can cancel the programme
and unload the machine. Just press any button or turn the programme selection knob to end the
function. The programme follow-up light will remain on even if you end the function by pressing
any button. If you end the function by turning the programme selection knob, the programme
follow-up light will remain on or go off depending on the selected programme. If you do not
cancel the function by pressing the Auxiliary Function button 3 for 3 seconds, it will be used in
the next washing cycles as well.

4.3.11 End Time Adjustment

The End Time Adjustment function allows you to set the end time of the programme up to 19
hours. You can increase this time by 1-hour intervals.
C
INFORMATION
• Please do not use liquid detergent if you have selected the End Time Adjustment function.
Stains might remain on the clothes.
1. Open the loading door, place the laundry and add detergent, etc.
2. Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
Washing Machine / User's Manual
21 / EN