Auxiliary Functions; Prewash; Functions/Programmes Selected By Pressing The Function Buttons; Drum Clean+ Steam 90 - Beko WUE 8622 XW User Manual

C
INFORMATION
• If the programme has not reached the spin step, you can change the spin speed without
switching the machine to Pause mode.
4.3.10 Auxiliary function selection
Select the desired auxiliary functions before starting the programme. You can also select or cancel
auxiliary functions suitable for the running programme without pressing the Start/Pause button
while the machine is operating. To do this, the machine must be in a step before the auxiliary
function you are going to select or cancel. If the auxiliary function cannot be selected or cancelled,
light of the relevant function will flash 3 times to warn the user.
C
INFORMATION
• If a second auxiliary function conflicting with the first one is selected before starting the
machine, the function selected first will be cancelled and the second auxiliary function
selection will remain active.
• An auxiliary function which is not compatible with the programme cannot be selected. (See
"Programme and consumption table")
• Auxiliary Function buttons may vary according to the model of the machine.

4.3.10.1 Auxiliary functions

Prewash

•
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy,
water, detergent and time.
C
INFORMATION
• Prewash without detergent is recommended for tulle and curtains.
• Fast+
When this function is selected, durations of relevant programmes get shorter by 50%.
Thanks to the optimised washing steps, high mechanic activity and optimum water consumption,
high washing performance is achieved in spite of the reduced duration.
• Extra Rinse
This function enables the machine to carry out another rinsing cycle in addition to the one carried
out after the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected
by the minimal detergent remnants on the laundrwy can be reduced.
4.3.10.2 Functions/Programmes Selected by Pressing the Function Buttons for 3
Seconds
• Drum Clean
To select this programme, press and hold the auxiliary function button 1 for 3 seconds.
Use it regularly (every 1-2 months) to clean the drum and ensure the required hygiene is
provided. Run the programme while the machine is totally empty. To obtain better results, put
powder lime-scale remover for washing machines into the detergent compartment no. "2".
When the programme is over, leave the loading door ajar so that the inside of the machine
gets dry.
20 / EN
Washing Machine / User's Manual