White-Balance, Luminance Adjustment - Iiyama PLE1902S Service Manual

19" LCD Color Monitor
9. White- Balance, Luminance Adjustment
Approximately 30 minutes should be allowed for warm up before proceeding
White-Balance adjustment.
1. How to do the Chroma-7120 MEM .Channel setting
A. Reference to chroma 7120 user guide
B. Use "SC" key and "NEXT" key to modify xyY value and use "ID" key to modify the
TEXT description Following is the procedure to do white-balance adjust
2. Setting the color temp. You want
A. 9300 color:
9300 color temp. parameter is x = 283 ±20, y = 297 ±20, Y = 170 ±20 cd/m
B. 7500 color:
7500 color temp. parameter is x = 299 ±20, y = 315 ±20, Y = 170 ±20 cd/m
C. 6500 color:
6500k color temp. parameter is x = 313 ±20, y = 329 ±20, Y = 170 ±20 cd/m
3. Enter into factory mode of PLE1902S
Turn on power, press the Menu button, pull out the power cord, and then plug the power cord. Then the factory
OSD will be at the left top of the panel.
4. Bias adjustment:
Set the Contrast
Adjust the Brightness
5. Gain adjustment :
Move cursor to "-F-" and press MENU key
A. Adjust 9300k color-temperature
1. Switch the Chroma-7120 to 9300k channel.
2. The chroma 7120 will show x = 283 ±20, y = 297 ±20, Y = 170 ±20 cd/m
3. Switch the chroma-720 to RGB MODE (with press "MODE" button to change)
4. Adjust the RED of color 9300K on factory window until chroma 7120 indicator reached
the value
5. Adjust the GREEN of color 9300K on factory window until chroma 7120 indicator reached
the value G=100
6. Adjust the BLUE of color 9300K on factory window until chroma 7120 indicator reached
the value B=100
7. Repeat above procedure (item 4, 5, 6) until chroma 7120 RGB value meet the
tolerance =100±2
to 90
to 100.
R=100
39
Iiyama PLE1902S
2 ,
2
2
2