Power Bank Function; Power And Charge Using Other Sources - oticon miniRITE R Instructions For Use Manual

Smartcharger
Table of Contents

Advertisement

Power bank function

When the charger is disconnected from power, the LEDs on your charger
indicate the charger's power bank battery level. You can check the
remaining battery level by opening the charger's lid.
Three full charging cycles of two hearing aids
Two full charging cycles of two hearing aids
One full charging cycle of two hearing aids
Battery too low for a full charging cycle
ORANGE blink
GREEN
Long-term storage
Before you put away or store the charger for a prolonged period of time
(more than 14 days), ensure you first fully charge the charger's power
bank battery. This way the battery can be charged again.
Note
To protect the rechargeable battery, it is necessary that you fully charge the charger's power bank battery every
12 months, otherwise the rechargeable battery may need to be replaced.
18
About Getting started
Daily use
Warnings More info

Power and charge using other sources

You can power and charge the charger's battery from other sources than
a power socket. This can be done by using the charger's USB cable.
Ensure that the power source is USB 2.0 compliant, with a minimum
of 500mA output.
Examples of power sources:
• Computer
• Car
IMPORTANT NOTICE
When using a power socket, use the supplied original power supply (5.0V/1A)
for the charger.
19

Advertisement

Table of Contents
loading

Table of Contents