Haier AS25S2SJ1FA-3 Operation Manual page 6

Operation
23
22
SMART
21
HUMIDITY
AIR
20
STATUS
19
18
Note:
The distance between the signal transmission head and
the receiver hole should be within 7m without any obstacle
change-over wireless telephone is installed in the type
in receiving the signals, so the distance to the indoor unit
should be shorter.
Full display or unclear display during operation indicates the
batteries have been used up. Please change batteries.
If the remote controller can't run normally during operation,
please remove the batteries and reload several minutes later
Hint:
Remove the batteries in case unit won't be in usage for
a long period.
18. TIMER button
19. CLOCK button
20. 10 ºC button
special heating set
function: 10 degree
heating maintaining
(valuable for RS)
21. SMART HUMIDITY button
22. SMART button
Used to set SMART
operation. (This function
is unavailable on some
models.)
23. SWING up/down button
24. SWING left/right button
25. SLEEP button
26. HEALTH AIRFLOW button
27. AIR STATUS button
24
28. CODE button
25
A-b yard
26
29. APPLY button
27
30. LIGHT button
28
Control the lightening and
29
extinguishing of the indoor
30
LED display board.
Clock and Lock set
SMART
HUMIDITY
AIR
STATUS
Press " SMART HUMIDITY" +"HEALTH AIRFLOW"
simultaneously can
function (
3
1
Press CLOCK button,
2
Press "+" or "-" to set
correct time.
Each press will increase or
decrease 1min. If the button is
kept pressed, time will change
quickly.
3
press APPLY, "AM" and
starts working.
set and cancel the "LOCK"
)
.