Hdmi Output; Hdmi Input - BrightSign 4K Series Hardware Manual

• Ring: Right audio
• Sleeve: Ground for audio signal

HDMI Output

The HDMI-out connector is used to send digital video and audio to HDMI-enabled sink devices. This connector is
compatible with HDMI 2.0 devices, capable of outputting a maximum video resolution of 3840x2160x60p.
The following table illustrates the pinout of the HDMI connector:
pin Description
1 TX2p
3 TX2n
5 Ground
7 TX0p
9 TX0n
11 Ground
13 CEC
15 DDC SCL
17 Ground
19 HDP (Hot Plug Detect)

HDMI Input

The HDMI-in connector is used to receive digital video and audio from HDMI-enabled source devices. This connector is
compatible with HDMI 2.0 devices, capable of accepting a maximum video resolution of 3840x2160x60p. The signaling
also conforms with DVI 1.0, HDMI 1.4, and HDCP 2.2 standards.
All information provided in this reference manual applies to products under development. The characteristics and specifications of these products are subject to
change without notice. BrightSign assumes no obligation regarding future manufacturing unless otherwise agreed to in writing. © BrightSign LLC, 2014
pin Description
2 Ground
4 TX1p
6 TX1n
8 Ground
10 TXCp
12 TXCn
14 NC
16 DDC SDA
18 +5V DDC
20 Ground
BrightSign 4K242, 4K1042, 4K1142
14